Search
English
  • 中文
  • English

LED packaging precautions

Time: 2023-07-06 15:57:58

Author: Zhongshan City Poolingled union photoelectric Co.,

Click:

In the LED packaging process, the vulcanization phenomenon mainly occurs in the

In the LED packaging process, the vulcanization phenomenon mainly occurs in the solidification and glue packaging process, and the vulcanization is mainly caused by silver-containing materials (silver-plated brackets and conductive silver glue) and silicon rubber materials. When silver-containing materials are vulcanized, black silver sulfide will be generated, resulting in yellow and black vulcanized areas. Silicone rubber materials are vulcanized will cause silicone "poisoning", resulting in curing obstacles, can not be fully cured. Among them, silicone curing agent poisoning: LED packaging with silicone curing agent contains platinum (platinum) complex, and this platinum complex is very easy to poison, poison agent is any nitrogen (N), phosphorus (P), sulfur (S) compound, once curing agent poisoning, silicone curing is not complete, it will cause high linear expansion coefficient, stress increase.

For example, in the patch lamp bead packaging process, the materials that may be vulcanized in the production process are:

1. In the solidification process, the silver-plated support is vulcanized, and the support becomes yellow and black and loses luster, which will lead to reduced reliability;

2. Solid crystal process, silver glue is vulcanized, silver glue black, dim color, will lead to reliability reduction or failure;

3. Solid crystal process, silicon properties of solid crystal adhesive is vulcanized, resulting in curing obstacles, can not be fully cured, will lead to a decline in adhesion or failure;

4. Dispensing, powder, packaging process, silicon property powder is vulcanized, will lead to curing obstacles, can not be fully cured, product failure;

5. Point powder process, phosphor containing sulfur, will lead to curing obstruction, product failure.

Prevention method

1. To avoid LED exposure to acidic (PH<7) workshop environment. The nitrogen-containing acid gas reacts first with silver and then with sulfur/chlorine/bromine elements to form black silver sulfide, silver chloride or silver bromide.

2. For other LED supporting materials purchased, the manufacturer can be asked to provide the LED excipients sulfur/bromine/chlorine test report provided by Jinjin to confirm whether it contains sulfur, halogen and other substances to prevent chemical or physical reactions with LED materials, resulting in silver plating corrosion of LED products, LED silicone, phosphor material performance variation. Resulting in LED photoelectric performance failure.

3. Use desulfurized gloves, finger covers and sulphur-free masks; Distinguish sulphur-free material, box clamp fixture; Use a sulphur-free cleaner; Sulfur-containing PCB board cleaning, desulfurization after use; Set up a special sulphur-free oven to use products separately and bake independently.

4. The substances prone to silica gel "poisoning" are: organic compounds containing N, P, S; Sn, Pb, Hg, Sb, Bi, As and other heavy metal ion compounds; An organic compound containing an unsaturated group such as an acetylene group. Pay attention to the following materials:

1. Organic rubber: sulfur vulcanized rubber such as gloves

2. Epoxy resin, polyurethane resin: amine, isocyanate resin curing agent

3. Integrated silicone RTV rubber: Especially the use of Sn catalysts

4. Soft vinyl cyanide: plasticizer and stabilizer

5. Flux

6. Engineering plastics: flame retardants, enhanced heat resistant agents, ultraviolet absorbers, etc

7. Silver-plated, gold-plated surface (plating solution at the time of manufacture is the main reason)

8.Solder register degassing (caused by silicone heating and curing)

In the LED packaging process, the vulcanization phenomenon mainly occurs in the solidification and glue packaging process, and the vulcanization is mainly caused by silver-containing materials (silver-plated brackets and conductive silver glue) and silicon rubber materials. When silver-containing materials are vulcanized, black silver sulfide will be generated, resulting in yellow and black vulcanized areas. Silicone rubber materials are vulcanized will cause silicone "poisoning", resulting in curing obstacles, can not be fully cured. Among them, silicone curing agent poisoning: LED packaging with silicone curing agent contains platinum (platinum) complex, and this platinum complex is very easy to poison, poison agent is any nitrogen (N), phosphorus (P), sulfur (S) compound, once curing agent poisoning, silicone curing is not complete, it will cause high linear expansion coefficient, stress increase.

For example, in the patch lamp bead packaging process, the materials that may be vulcanized in the production process are:

1. In the solidification process, the silver-plated support is vulcanized, and the support becomes yellow and black and loses luster, which will lead to reduced reliability;

2. Solid crystal process, silver glue is vulcanized, silver glue black, dim color, will lead to reliability reduction or failure;

3. Solid crystal process, silicon properties of solid crystal adhesive is vulcanized, resulting in curing obstacles, can not be fully cured, will lead to a decline in adhesion or failure;

4. Dispensing, powder, packaging process, silicon property powder is vulcanized, will lead to curing obstacles, can not be fully cured, product failure;

5. Point powder process, phosphor containing sulfur, will lead to curing obstruction, product failure.

Prevention method

1. To avoid LED exposure to acidic (PH<7) workshop environment. The nitrogen-containing acid gas reacts first with silver and then with sulfur/chlorine/bromine elements to form black silver sulfide, silver chloride or silver bromide.

2. For other LED supporting materials purchased, the manufacturer can be asked to provide the LED excipients sulfur/bromine/chlorine test report provided by Jinjin to confirm whether it contains sulfur, halogen and other substances to prevent chemical or physical reactions with LED materials, resulting in silver plating corrosion of LED products, LED silicone, phosphor material performance variation. Resulting in LED photoelectric performance failure.

3. Use desulfurized gloves, finger covers and sulphur-free masks; Distinguish sulphur-free material, box clamp fixture; Use a sulphur-free cleaner; Sulfur-containing PCB board cleaning, desulfurization after use; Set up a special sulphur-free oven to use products separately and bake independently.

4. The substances prone to silica gel "poisoning" are: organic compounds containing N, P, S; Sn, Pb, Hg, Sb, Bi, As and other heavy metal ion compounds; An organic compound containing an unsaturated group such as an acetylene group. Pay attention to the following materials:

1. Organic rubber: sulfur vulcanized rubber such as gloves

2. Epoxy resin, polyurethane resin: amine, isocyanate resin curing agent

3. Integrated silicone RTV rubber: Especially the use of Sn catalysts

4. Soft vinyl cyanide: plasticizer and stabilizer

5. Flux

6. Engineering plastics: flame retardants, enhanced heat resistant agents, ultraviolet absorbers, etc

7. Silver-plated, gold-plated surface (plating solution at the time of manufacture is the main reason)

8.Solder register degassing (caused by silicone heating and curing)

In the LED packaging process, the vulcanization phenomenon mainly occurs in the solidification and glue packaging process, and the vulcanization is mainly caused by silver-containing materials (silver-plated brackets and conductive silver glue) and silicon rubber materials. When silver-containing materials are vulcanized, black silver sulfide will be generated, resulting in yellow and black vulcanized areas. Silicone rubber materials are vulcanized will cause silicone "poisoning", resulting in curing obstacles, can not be fully cured. Among them, silicone curing agent poisoning: LED packaging with silicone curing agent contains platinum (platinum) complex, and this platinum complex is very easy to poison, poison agent is any nitrogen (N), phosphorus (P), sulfur (S) compound, once curing agent poisoning, silicone curing is not complete, it will cause high linear expansion coefficient, stress increase.

For example, in the patch lamp bead packaging process, the materials that may be vulcanized in the production process are:

1. In the solidification process, the silver-plated support is vulcanized, and the support becomes yellow and black and loses luster, which will lead to reduced reliability;

2. Solid crystal process, silver glue is vulcanized, silver glue black, dim color, will lead to reliability reduction or failure;

3. Solid crystal process, silicon properties of solid crystal adhesive is vulcanized, resulting in curing obstacles, can not be fully cured, will lead to a decline in adhesion or failure;

4. Dispensing, powder, packaging process, silicon property powder is vulcanized, will lead to curing obstacles, can not be fully cured, product failure;

5. Point powder process, phosphor containing sulfur, will lead to curing obstruction, product failure.

Prevention method

1. To avoid LED exposure to acidic (PH<7) workshop environment. The nitrogen-containing acid gas reacts first with silver and then with sulfur/chlorine/bromine elements to form black silver sulfide, silver chloride or silver bromide.

2. For other LED supporting materials purchased, the manufacturer can be asked to provide the LED excipients sulfur/bromine/chlorine test report provided by Jinjin to confirm whether it contains sulfur, halogen and other substances to prevent chemical or physical reactions with LED materials, resulting in silver plating corrosion of LED products, LED silicone, phosphor material performance variation. Resulting in LED photoelectric performance failure.

3. Use desulfurized gloves, finger covers and sulphur-free masks; Distinguish sulphur-free material, box clamp fixture; Use a sulphur-free cleaner; Sulfur-containing PCB board cleaning, desulfurization after use; Set up a special sulphur-free oven to use products separately and bake independently.

4. The substances prone to silica gel "poisoning" are: organic compounds containing N, P, S; Sn, Pb, Hg, Sb, Bi, As and other heavy metal ion compounds; An organic compound containing an unsaturated group such as an acetylene group. Pay attention to the following materials:

1. Organic rubber: sulfur vulcanized rubber such as gloves

2. Epoxy resin, polyurethane resin: amine, isocyanate resin curing agent

3. Integrated silicone RTV rubber: Especially the use of Sn catalysts

4. Soft vinyl cyanide: plasticizer and stabilizer

5. Flux

6. Engineering plastics: flame retardants, enhanced heat resistant agents, ultraviolet absorbers, etc

7. Silver-plated, gold-plated surface (plating solution at the time of manufacture is the main reason)


Top
图片展示
图片展示

    Phone: 0760-88706696

    Fax: 0760-88716606

    E-mail: sales@poolingled.com

    ADD: 2F, Building 2, No. 1 Xinggang North Road, Gangkou Town, Zhongshan City, Guangdong Province, China

Copyright @ VillaGrandis All Rights Reserved  ICP备案号2023074306号

Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.